|
1-800-780-8677
UK: (0) 87 1666 0259
|
| |
|
| |
|
Marine
-
Boating
-
Prop Guard™
-
PROP GUARD™ MEASUREMENT
|
|
|
 Prop
Guard™ Measurement
To obtain and select the Prop Guard™ for
your boat you must measure the distance from your anti-cavitation
plate to the center of your propeller shaft. Refer to Fig.
A.
| Prop Guard Sizes to
HP |
| 9XP Prop
Guard™ (Safety White) fits 5hp to 9hp |
| 9"
Prop Guard™ (Safety Yellow) fits 9.9hp to 20hp
(except Big Foot & High Thrust, Require 11")
|
| 11"
Prop Guard™ (Safety Orange) fits 25hp to 35hp
(except Big Foot & High Thrust, Require 13")
|
| 13"
Prop Guard™ (Safety Blue) fits 40hp to 65hp
(except Big Foot & High Thrust, Require 14")
|
14" Prop
Guard™ (Safety Red) fits 70hp to 100hp
(except Big Foot & High Thrust, Require 16") |
16"
Prop Guard™ (Safety White) fits 110hp to 350hp
(All Stern Drives & Volvo Dual) |
Prop Guards will fit all Manufacturers Outboards
and Stern Drives.
NOTE: All hp's with Big Foot
& High Thrust applications require next size up. |
| All applications of the 13", 14",
& 16" Prop Guards are Pontoon & Deck Boats,
and any other application that the vessel does not exceed
25 mph. Until our New Design comes out. |
| Prop
Guard Application Chart |
| Cavitation
Plate to Prop Shaft |
Prop Guard Model Size |
Maximum Propeller Size |
| 4.25" to 5.5" |
9" Prop Guard™ |
8.5" propeller |
| 5.75" to 6.0" |
11" Prop Guard™ |
10.5" propeller |
| |
13" Prop Guard™ |
12.5" propeller |
| 6.5" to 7.5" |
14" Prop Guard™ |
13.5" propeller |
| 8.0" to 8.5" |
16" Prop Guard™ |
15.0" propeller |
To obtain optimal performance out of your motor with the Prop
Guard™ installed, you may need to change your propeller diameter:
The closer the prop blades are to the guard rings, will optimize
your performance, handling and will not create a drag. Your motor
will also have to be trimmed to a setting of optimal performance.
Refer to Fig. B.
Be sure the Prop Guard™ you purchase is the correct size. Place
it on your motor with Grip Clamps first and CHECK YOUR CLEARANCES
BEFORE DRILLING HOLES AND MOUNTING.
Manufacturer will not warrant your Prop Guard™ should you drill
into Prop Guard™ and find you have purchased the wrong size.
Above all, please take your time in measuring and selecting the
proper size Prop Guard™.
Call us or bring your motor by for an inspection for proper size.
|
|
|